HP 3800 Series User Manual

Note 11 If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and
integrated to CTO chassis. See Menu below, option must have a #0D1 to be integrated to the CTO Chassis.
Rack Level Integration CTO Models
HP 3800-24G-PoE+-2SFP+ Switch J9573A
24 RJ-45 autosensing 10/100/1000 PoE+ ports
2 fixed 1000/10000 SFP+ ports
min=0 \ max=2 SFP+ Transceivers
1 open stacking module slot
1 HP X312 100w Power Supply included
1 HP E3800 Switch Fan Tray (J9582A) included
1U - Height
See Configuration
Note:1, 2, 5, 6, 11
PDU Cable NA/MEX/TW/JP J9573A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW J9573A#B2C
C15 PDU Jumper Cord (ROW)
HP 3800-48G-PoE+-4SFP+ Switch J9574A
48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
1 open stacking module slot
1 HP X312 100w Power Supply included
1 HP E3800 Switch Fan Tray (J9582A) included
1U - Height
See Configuration
Note:1, 2, 5, 6, 11
PDU Cable NA/MEX/TW/JP J9574A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW J9574A#B2C
C15 PDU Jumper Cord (ROW)
HP 3800-24G-2SFP+ Switch J9575A
24 RJ-45 autosensing 10/100/1000 ports
2 fixed 1000/10000 SFP+ ports
min=0 \ max=2 SFP+ Transceivers
1 open stacking module slot
1 X311 400W Power Supply included
1 HP E3800 Switch Fan Tray (J9582A) included
1U - Height
See Configuration
Note:1, 2, 5, 6, 11
PDU Cable NA/MEX/TW/JP J9575A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
QuickSpecs
HP 3800 Switch Series
Configuration
DA - 14152 Worldwide — Version 15 — January 16, 2014 Page 17

HP 3800 Series Specifications

General

Ports	4 x SFP
Routing Protocol	RIP
Management	Web, CLI, SNMP
Form Factor	Rack-mountable
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing