HP 3800 Series User Manual

Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America,
Mexico, Taiwan, and Japan)
Enter the following menu selections as integrated to the CTO Model X switch above if order is factory built.
Modules
System (std 0 // max=1) User Selection (min 0 / max=1) per Chassis
HP 3800 4-port Stacking Module J9577A
See Configuration
Note:1
Configuration Rules:
Note 1 The following Cables install into this Module: (Use #0D1 qutoed to switch if switch is
CTO) - if applicable
J9578A - HP E3800 0.5m Stacking Cable
J9665A - HP E3800 1m Stacking Cable
J9579A - HP E3800 3m Stacking Cable
Transceivers
SFP Transceivers
HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP LC SX Transceiver J4858C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X111 100M SFP LC FX Transceiver J9054C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
SFP+ Transceivers
QuickSpecs
HP 3800 Switch Series
Configuration
DA - 14152 Worldwide — Version 15 — January 16, 2014 Page 22

HP 3800 Series Specifications

General

Ports	4 x SFP
Routing Protocol	RIP
Management	Web, CLI, SNMP
Form Factor	Rack-mountable
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing