26 Chapter 2: Printing Tasks
EN
Loading Tray 1
Note
To avoid paper jams, do not load trays
while the printer is printing.
Tray 1 is a multi-purpose tray that holds
a variety of paper, including up to
100 sheets of paper, 10 envelopes, or
20 index cards. The printer might pull
paper from Tray 1 first. To change this,
see page 50. For supported sizes of
paper, see page A-3.
1
Open Tray 1.
2
Pull out the tray extension.
3
Set the side guides to the desired
width.
4
Load Tray 1.
5
Paper should fit, without bending,
under the tabs on the guides, and
below the line as indicated. For
correct orientation, see page 36.
To Next Page
Loading...