HP 4000N

80 Chapter 4: Problem Solving
EN
Z[\\
24+06'4'4414
There is a problem with the printer’s memory. The DIMM that caused
the error will not be used. Values of
Z
,
[
, and
\\
are as follows:
x = DIMM type 0 = ROM
1 = RAM
y = Device location 0 = Internal memory (ROM or RAM)
1 to 3 = DIMM slots 1, 2, or 3
zz = Error number
You might need to replace the specified DIMM.
Turn the printer off, and then replace the DIMM that caused the error.
If this message persists, contact an HP-authorized service or support
provider. (See the HP Support pages at the front of this user’s guide.)
24+06'4'4414
alternates with
24'55)161
%106+07'
A temporary printing error occurred.
Press
[Go]
. The page containing the error will automatically be
reprinted.
If this message persists, contact an HP-authorized service or support
provider. (See the HP Support pages at the front of this user’s guide.)
ZZ
ZQTZ
24+06'4'4414
A temporary printing error occurred.
Turn the printer off, and then turn the printer on.
If this message persists, contact an HP-authorized service or support
provider. (See the HP Support pages at the front of this user’s guide.)
Z
24+06'4'4414
There is a problem with the printer’s memory. The
Z
value refers to
the location of the problem:
0 = Internal memory
1 to 3 = DIMM slots 1, 2, or 3
You might need to replace the specified DIMM.
If this message persists, contact an HP-authorized service or support
provider. (See the HP Support pages at the front of this user’s guide.)
Z
24+06'4'4414
A temporary printing error occurred.
Turn the printer off, and then turn the printer on.
If this message persists, contact an HP-authorized service or support
provider. (See the HP Support pages at the front of this user’s guide.)
Printer Messages (Continued)
Message Explanation or Recommended Action