EN Chapter 7 Troubleshooting 191
Display
The control panel should display
READY
,
OFFLINE
, or
POWERSAVE ON
. If the display is blank, see page
188. If an error message is displayed, refer to the printer messages table starting on page 194 and
perform the necessary actions to correct the error condition.
Event log
Use the event log to diagnose and troubleshoot printer errors and intermittent failures. You can either
display or print the event log.
Access the event log from the control panel information menu. (Select
PRINT EVENT LOG
or
SHOW
EVENT LOG
.) The event log retains the printer’s last 20 error messages.
Figure 94. Sample event log
To Next Page
Loading...