EN Chapter 3 Printer operation 65
CREATE
CLEANING PAGE
No value to select. Press S
ELECT
to print a
cleaning page (for cleaning
excess toner from the fuser
assembly).
In order for the cleaning page
to work correctly, print the
page on copier-grade paper
(not bond or rough paper).
Follow the instructions on the
cleaning page.
PROCESS
CLEANING PAGE
No value to select. This item appears only after a
cleaning page has been
created (as described above).
Follow the instructions on the
cleaning page.
Note
It might take approximately two
minutes for the printer to finish
processing the cleaning page.
Table 24. Print quality menu (continued)
Item Values Explanation
To Next Page
Loading...