86 Printer maintenance EN
Performing printer maintenance
The printer maintenance cycle for this printer is every 200,000 pages. The kit contains the following
replacement parts:
!
one fuser
!
one transfer roller
!
one transfer roller tool
!
one pickup roller (for tray 1)
!
six feed and separation rollers (for trays 2, 3, and 4)
!
one pair of disposable gloves
!
instructions
See the instructions included in the kit for detailed replacement procedures.
The maintenance kit can be ordered from the Customer Services and Support Center. To order the
maintenance kit, see page 270.
Reset maintenance count
The maintenance page count should be reset only after a maintenance kit has been installed.
This resets the maintenance counter so that the message
PERFORM PRINTER MAINTENANCE
will
appear after another 200,000 pages (default).
1 Hold down the - I
TEM
and - V
ALUE
keys.
2 Turn the printer on.
3 Wait for
RESET MAINTENANCE COUNT
to appear and then release both keys.
Table 31. Maintenance kit part numbers
Description Exchange no. Product no.
Maintenance kit (110 V) C8057-69001 C8057A
Maintenance kit (220 V) C8058-69001 C8058A
To Next Page
Loading...