SECTION II
2-23. STORAGE AND SHIPMENT
2-24. ENVIRONMENT
2-25. The instrument may be stored or shipped
in environments within the following limits:
Storage :
Temperature •~~~..~~~ -22 O C to +55 O C
(+4 O C to +50 ’ C with discs)
Humidity . . . . . . . . . . . . . . . 8%
to 80% (RH)
Shipment :
Temperature
l
****=*** -40 ’ C to +62 ’ C
(-40 O C to +50 ’ C with discs)
The instrument should be protected from
temperature extremes which cause condensation
inside the instrument.
2-26. PACKAGING
2-2 7. Original Packaging. Containers and
materials identical to those used in factory
packaging are available from Hewlett-Packard.
If the instrument is being _-returned to
Hewlett-Packard for servicing, attach a tag
indicating the type of service required, return
address, model number, and full serial number.
Also mark the container FRAGILE to assure
careful handling. In any correspondence, refer
to the instrument by model number and full
serial number.
2-28. Other Packaging. The following general
instructions should be used for re-packing with
commercially available materials:
a. Wrap instrument in heavy paper or
plastic.
If shipping to Hewlett-Packard
office or service
center, attach tag
indicating type of service required, return
address, model number, and full serial
number.
b.
Use
strong shipping container. A
double-wall carton made of 350 pound
test material is adequate.
d.
Model 4145A
Seal shipping container securely.
d
e. Mark shipping container FRAGILE to
ensure careful handling.
f. In
any
correspondence, refer to
instrument by model number and full
serial number .
C.
Use enough shock absorbing material (3 to
4 inch layer) around all sides of
instrument to provide firm cushion and
prevent
movement inside container.
Protect control panel with cardboard.
2-4
To Next Page
Loading...
