HP 4145A - Page 39

SECTION III Model 4145A
EDIT Keys :
These keys are used to edit data displayed
on the Keyboard Input Line.
BACK :
Moves the Keyboard Input
Line cursor (-) left one
position. If this key is
pressed while the cursor is at
the left-most position, the
displayed text will move to
the right.
FORWARD: Moves the Keyboard Input
Line cursor (- ) right one
position. If this key is
pressed while the cursor is at
the right-most position, the
displayed text will move to
the left.
DELETE : Causes the character at the
position of the cursor to be
deleted. The cursor remains
at the same position and all
text to the right of the
deleted character moves one
position to the left as each
character is deleted.
INSERT : Causes the character at the
position of the cursor and all
text to the right of the
cursor to move right one
position, leaving a space at
the position of the cursor and
all0 wing insertion of
additional characters. To
exit from this mode, press
INSERT a second time.
RECALL : Causes previous entries or
executions to be re-displayed
on the Keyboard Input Line.
CLEAR : Clears all text from the
Keyboard Input Line and
returns the cursor to the
home (left-most) position.
Figure 3-2. Front Panel Features (Sheet 5 of 6).
3-6