HP 4395A - Page 300

Error Messages in Alphabetical Order
143 FLOATING POINT ERROR OCCURED
Indicate that a oating point error occured in the analyzer. Data processing may not be correct.
This error message is used when an internal application was executed for illegal data sent from
an external device, or when an internal software bug was detected. Contact your nearest
Hewlett-Packard oce.
83 FORMAT NOT VALID FOR MEASUREMENT
The conversion function except the 1/S and the multiple phase modes is not valid for the
Smith, admittance, and SWR formats.
131 FREQUENCY SWEEP ONLY
The sweep type must be frequency sweep when the center step size is set.
G
0 105 GET not allowed
A Group Execute Trigger (GET) was received within a program message (see IEEE 488.2, 7.7).
H
0 240 Hardware error
Indicates that a legal program command or query could not be executed because of a hardware
problem in the analyzer. Denition of what constitutes a hard ware problem is completely
device-specic. This error message is used when the analyzer cannot detect the more specic
errors described for errors 0 241 through 0 249.
0 241 Hardware missing
A legal program command or query could not be executed because of missing analyzer
hardware.For example, an option was not installed.
0 111 Header separator error
A character that is not a legal header separator was encountered while parsing the header.For
example, no white space followed the header, thus *SRE4 is an error.
0 114 Header Sux out of range
The value of a numeric sux attached to a program mnemonic makes the header invalid.
I
0 224 Illegal parameter value
Used where exact value, from a list of possibilities, was expected.
Messages-6