Error Messages in Alphabetical Order
0
211
Trigger ignored
A GET,
*TRG
, or triggering signal was received and recognized by the analyzer but was ignored
because of analyzer timing considerations.For example, the analyzer was not ready to respond.
U
0
113
Undened header
The header is syntactically correct, but it is undened for the analyzer.For example,
*XYZ
is
not dened for the analyzer.
19
UNEXPECTED DATA DETECTED: CAL ABORTED
The signal measured for the level cal is not adequate for the calibration signal. (spectrum
analyzer mode only.)
Messages-14
To Next Page
Loading...
