Common Controls
The following are common controls used to adjust many of the monitor settings.
?: Opens the online help file in the default browser window.
X: Closes HP Display Assistant.
+/-: Increases or decreases the monitor value by one unit for the current adjustment pane.
Slider: Increases or decreases the monitor value for the current adjustment pane.
Pattern: Displays the adjustment image used to tune the display in OSD mode. To close the adjustment
image, click the Pattern button again.
Undo: Restores the monitor value for the active adjustment pane to its previous setting.
Reset: Restores the monitor value for the active adjustment pane to its factory setting.
Common Controls 3
To Next Page
Loading...
