HP 48SX - Page 21

Local/Local Configuration
Local/Server Configuration
Execute “receive” command:
—For HP 48 receiver, press («aJ(i/0] RECY ;or, to
rename vanable enter variable name and press
(«)(/0) RECH
—-For computer recelver execute “receive”
command.
Execute “send” command:
-For HP 48 sender, enter variable and press
(«)i/0) EEH
- For computer sender, issue “send” filespec
command.
Repeat steps 1 and 2 to transfer additional
information.
Set server operation:
—For HP 48 server, press [()(I/0] SEERV .
—For computer server, execute “server” command.
On local device,
-To send file to server, execute “send’” command.
-To receive file from server, execute “get”
command.
Repeat step 2 to send additional information.
Execute “finish” on local device to end session.