• HP Common Slot and industry-standard power supply options (all nodes share redundant power
across the chassis)
Shared power
The DL1000
system shares power supplies and thermal management across all nodes. Figure 9
displays the four server node configuration and available ports for each server node.
Figure 9. DL1000 fou
r node configuration – rear chassis view
Four node 2U
configuration
Redundant
power
Riser options
Three PCI
e riser options are available for half-width servers. Available space in the h1000 chassis
limits the riser options to two-node configurations only. The riser boards support both full and half
length PCIe 2.0 cards (Figure 10).
Figure 10. 2U riser options
Half length riser
Full length riser
Fans and fan control
Standard fan configuration for the h1000 chassis includes four, 80mm non-redundant fans. Figure 11
illustrates how the server nodes share thermal management.
25