52 Chapter 2: Printing Tasks
EN
6a When loading a full stack of
media, continue to step 6B.
Otherwise, proceed to step 7.
6b Align the tension lever up or down
to match the symbol displayed in
the tension indicator window.
7 To prevent jams, rotate the dial in the
tray so the printer will read the
correct size of paper. The toggle
switch accesses more sizes. An
error message will appear in the
control panel display if the dial is not
set properly.
8 Slide the tray into the printer.
Note
If you want to print by type and size of
paper from the printer driver, configure
the tray settings in the printer’s control
panel to match the type of paper loaded
in each tray (page 60).
To Next Page
Loading...