Cleaning the printer
During the printing process, paper, toner, and dust particles can accumulate inside the printer. Over
time, this buildup can cause print-quality problems, such as toner specks or smearing (see
Troubleshooting print-quality problems on page 125). This printer has a cleaning mode that can correct
and prevent these types of problems.
To clean the printer using the printer control panel
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight PRINT QUALITY, and then press .
4. Press
to highlight CREATE CLEANING PAGE, and then press .
5. Remove all paper from tray 1.
6. Remove the cleaning page and load it face-down in tray 1.
NOTE: If you are not in the menus, navigate to PRINT QUALITY by using the previous
instructions.
7. At the printer control panel, press to highlight PROCESS CLEANING PAGE, and then
press .
ENWW Cleaning the printer 91
To Next Page
Loading...