Control panel message Description Recommended action
52.XY ERROR
alternates with
To continue turn off then on
A printer error has occurred. 1.
Press
to continue.
2. If the message persists, turn the printer
off and then on.
3. If the message persists, contact
HP Support.
53.10.01 ERROR UNSUPPORTED RAM The memory DIMM is not a supported DIMM. Install a supported DIMM. See Installing
printer memory on page 173.
54.XX ERROR A printer command error has occurred. 1. Turn the printer off and then on.
2. If the message persists, contact
HP support.
55.XX.YY DC CONTROLLER ERROR
alternates with
To continue turn off then on
The engine is not communicating with the
formatter.
1. Turn the printer off and then on.
2. If the message persists, contact HP
Support.
56.XX ERROR
alternates with
To continue turn off then on
An error has occurred. 1. Turn the printer off and then on.
2. If the message persists, contact HP
Support.
57.XX PRINTER ERROR
alternates with
To continue turn off then on
A printer fan error has occurred. 1. Turn the printer off and then on.
2. If the message persists, contact
HP Support.
58.XX ERROR
alternates with
To continue turn off then on
An error has occurred in which a memory tag
CPU was detected.
1.
Press
to view step-by-step
information.
2. Turn the printer off and then on.
3. If the message persists, contact HP
Support.
4.
To exit, press
.
59.XY ERROR
alternates with
To continue turn off then on
A printer motor error has occurred. 1. Turn the printer off and then on.
2. If the message persists, contact
HP Support.
NOTE: This message might also
appear if the transfer unit is missing or
incorrectly installed. Ensure that the
transfer unit is correctly installed.
62 NO SYSTEM No system was found. 1. Turn the printer off and then on.
2. If the message persists, contact
HP Support.
64 ERROR
For help press
alternates with
A scan buffer error has occurred. 1. Turn the printer off and then on.
2. If the message persists, contact
HP Support.
ENWW Control-panel messages 107
To Next Page
Loading...