Parallel configuration
A parallel connection is made by connecting the printer to the computer using a bidirectional parallel
cable (IEEE-1284 compliant) with a connector plugged into the printer parallel port. The cable can be a
maximum of 10 meters (30 feet) long.
When used to describe a parallel interface, the term bidirectional indicates that the printer is able to both
receive data from the computer and send data to the computer through the parallel port. While the
parallel interface provides backwards compatibility, a USB connection is recommended to optimize
performance.
1
2
1 Parallel port
2 Parallel connector
44 Chapter 3 Input/output (I/O) configuration ENWW
To Next Page
Loading...