Printing on both sides (duplexing)
You can print on both sides of a sheet of paper (called duplexing or two-sided printing) manually.
The printer prints the first side of each page, waits for you to reinsert the paper into the printer, and then
prints the second side of each page. Other documents cannot be printed while the printer waits for you
to insert the paper for the second side to be printed.
CAUTION: Do not print on both sides of labels, transparencies, or vellum. Damage to the printer and
jams might result.
Paper orientation for printing on both sides
For manual duplexing, print on the second side of the sheet of paper first. The paper needs to be oriented
as shown in the following illustration.
●
For tray 1, load the first side facing down with the bottom, short edge toward the printer.
●
For all other trays, load the first side facing up with the top, short edge toward the printer.
1
2
1 Tray 1
2 All other trays
Layout options for printing on both sides
The following illustration shows the four print-orientation options. These options are available when
Print on Both Sides is selected on the Finishing tab in the printer driver.
ENWW Printing on both sides (duplexing) 69
To Next Page
Loading...