HP 5355A - Page 12

Mode! 5355A
General Information
Table 1-1. Model S355A Specifications
5356 A
5356B*
5356C*
5355A t
Frequency Range
1.5—18 GHz
1.5—26.5 GHz
(Option 001: 18—26.5 GHz)
1.5—40 GHz
(Option 001: 26.5—40 GHz)
0.4—1.6 GHz
Sensitivity
0.4—1.6 GHz
1.5—12.4 GHz
12.4— 18 GHz
18—26.5 GHz
26.5— 34 GHz
34—40 GHz
.20 dBm
--15 dBm
NOTE: For pulse
-20 dBm
”15 dBm
-15 dBm
widths <200 ns reduce sens
-25 dBm
-20 dBm
-20 dBm
-75 dBm
-10 dBm
itivity by 5 dB
-15 dBm
Maximum Input
0.4—1.6 GHz
1.5—12.4 GHz
12.4— 18 GHz
18—26.5 GHz
26.5— 40 GHz
+5 dBm
~5 dBm
+5 dBm
+5 dBm
+5 dBm
+5 dBm
+15 dBm
+15 dBm
+15 dBm
+5 dBm
Dynamic Range
0.4—1.6 GHz
1.5—12.4 GHz
12.4— 18 GHz
18—26.5 GHz
26.5— 34 GHz
34—40 GHz
25 dB
20 dB
25 dB
20 dB
20 dB
30 dB
35 dB
35 dB
30 dB
25 dB
20 dB
Damage Level
+25 dBm peak
+25 dBm peak
+25 dBm peak
+24 dBm peak
(fuse in BNC connector)
Impedance
50fl NOMINAL
50n NOMINAL
50fl NOMINAL
50(1 NOMINAL
SWR
0.4—1.6 GHz
1.5— 10 GHz
10—18 GHz
18-26.5 GHz
26.5— 34 GHz
34—40 GHz
<2:1 TYPICAL
<3:1 TYPICAL
<2:1 TYPICAL
<3:1 TYPICAL
<3:1 TYPICAL
<2:1 TYPICAL
<3:1 TYPICAL
<3:1 TYPICAL
<3:1 TYPICAL
<5:1 TYPICAL
<2.5:1 TYPICAL
Connector
N Male
SMA male with collar
(Option 001: 18—26.5 GHz
waveguide (WR 42))
ARC—3.5 male with collar
(Option 001: 26.5—40 GHz
waveguide (WR28))
BNC
* Specifications in italics apply to both the standard 5356 Head and Option 001 of the same model. ! 0.4—1.6 GHz input
OPERATING MODE SPECIFICATIONS (CW MODE)
5356A/B/C INPUT
AUTO MODE
5356 A/B/C
MAN MODE
5355A
6.4—1.6 GHz INPUT
FM Tolerance
5356A/B: 15 MHz p-p
{60 MHz in special FM mode)
5356C: 60 MHz p-p
Rate: dc—10 MHz
80 MHz p-p
Rate: dc—10 MHz
Instantaneous frequency must
not exceed 0.4—1.6 GHz range.
AM Tolerance
Any modulation index provided the minimum signal level is greater than the counter sensitivity.
Multiple Signal Discrimination
(TYPICAL)
Automatically measures largest signal provided signal is 8 dB
greater than any signal within 500 MHz and 20 dB greater than
any signal over 1.5—26.5 GHz range. (5356C only:
15 dB (option 001: 20 dB) greater than any signal over
26.5—40 GHz range)
Acquisition Time
(TYPICAL)
5356A/B: 400 ms
(1.1s in special FM mode)
5356C: 1.4s (option 001: 1.1s)
15 ms
<1 ms (FREQ >800 MHz)
5345A GATE TIME +45 ms
(FREQ <800 MHz)
Specifications describe the instrument’s warranted performance. Supplemental characteristics are intended to provide information useful in applying the instru¬
ment by giving TYPICAL or NOMINAL, but nonwarranted performance parameters. Definition of terms is provided at the end of the specification section.
1-2