HP 5400zl Series - Introducing the ProCurve Series 5400 zl Switches

11
Figure 2. HP ProCurve Switch 5400zl Chassis and Bundles
The HP ProCurve Switch 5406zl-48G Intelligent Edge (J8699A) and 5412zl-96G Intelligent Edge
(J8700A) are preconfigured bundles that offer a pretested environment and a lower cost starter switch
to which additional modules can be added. The major components of these preconfigured bundles are
the following:
5406zl-48G Intelligent Edge 5412zl-96G Intelligent Edge
6-slot chassis 12-slot chassis
1 management module 1 management module
1 fabric module 2 fabric modules
48 10/100/1000 PoE ports 96 10/100/1000 PoE ports
4 open slots 8 open slots
1 fan tray (2 fans) 1 fan tray (4 fans)
1 internal 875W power supply 2 internal 875W power supplies
1 open power-supply slot 2 open power-supply slots
Intelligent Edge software Intelligent Edge software
5400zl chassis layout
The HP ProCurve Switch 5406zl chassis is rack-mountable with a 4U height, and the Switch 5412zl is
rack-mountable with a 7U height. The line interface modules are inserted in the front slots, labeled A
through F on the 5406zl, and A through L on the 5412zl.
The management module is removable/replaceable and occupies a dedicated slot in the front. The
switch does not have to be powered-off to remove the management module.
ProCurve Switch 5406zl
ProCurve Switch 5412zl
ProCurve Switch 5406zl-48G
ProCurve Switch 5412zl-96G
(J8697A)
(J8699A)
(J8700A)
(J8698A)
ProCurve Switch 5400zl Chassis ProCurve Switch 5400zl Bundles