6. Close the transfer unit and front cover.
Note
It is a good idea to inspect the input trays when clearing jams. However, opening and closing
input trays has no effect on clearing jam messages.
7. Pull out Tray 2 and place it on a flat surface. Remove any partially fed paper.
8. Inspect the paper path above to ensure that it is clear. To remove any partially fed
paper, grasp the paper by both corners and pull down.
Note
If the paper tears, make sure that all paper fragments are removed from the paper path
before resuming printing.
ENWW Clearing paper jams 187
To Next Page
Loading...