Jam in the top cover
WARNING!
Do not touch the fuser. It is hot and could cause burns! The fuser’s operating temperature is
190°C (374°F). Wait ten minutes to allow the fuser to cool before touching the fuser.
1. Using the side handles, open the top cover.
2. Firmly pull forward on the two green levers to disengage the fuser rollers.
WARNING!
Do not touch the fuser. It is hot and could cause burns! The fuser’s operating temperature is
190°C (374°F). Wait ten minutes to allow the fuser to cool before touching the fuser.
196 Chapter 8 Problemsolving ENWW
To Next Page
Loading...