4. Grasp the paper by both corners and pull up.
5. Inspect the paper path to ensure that it is clear.
Note
If the paper tears, make sure that all paper fragments are removed from the paper path
before resuming printing.
6. Close the transfer unit and front cover.
7. Pull out Tray 2 (and Trays 3, 4, and 5, if the printer contains these trays). Place each
tray on a flat surface. Remove any partially fed paper from these trays.
8. Inspect the paper path above and below to ensure that it is clear.
Note
If the paper tears, make sure that all paper fragments are removed from the paper path
before resuming printing.
ENWW Clearing paper jams 201
To Next Page
Loading...