10
Installing the switch
CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence caused thereby.
Figure 13 Hardware installation flow
Installing the switch in a 19-inch rack
Installation prerequisites
The rack depth for the HP 5920AF-24XG, 5920AF-24XG TAA, 5900AF-48XGT-4QSFP+,
5900AF-48XG-4QSFP+, and 5900AF-48XG-4QSFP+ TAA switches must be 1000 mm (39.37 in).
To Next Page
Loading...
Need help?
General
