HP 6038A Service Manual

Table 1-1. Specifications and Supplemental Characteristics (continued)
Remote Sensing
Meets ioad-effect specification at load by correcting for load-
lead drop of up to 0.5 V per lead with sense wire resistance
of less than 0.2 ohms per sense lead and lead lengths of less
than 5 metres.
Operation with up to 2V drop per load lead is possible; load-
effect specification depends on sense-wire resistance. Refer
to Section Hi.
Reverse Voltage Protection
Maximum permissible current caused by reverse voltage im¬
pressed across output terminals;
10 A with AC power on
10 A with AC power off
Temperature Ratings
Operating: 0 to -f 55°C
Storage: -40 to -f75°C
Certification
Unit complies with the following requirements;
lEC 348-Safety Requirements for Electronic Measuring
Apparatus.
CSA 556B-Electronic instruments and Scientific Apparatus
for Special Use and Applications.
VDE 0411-Electronic Measuring Instruments and Automatic
Controls.
VDE 0871/6.78 level B- RFi Suppression
Dimensions: See Figure 2-1
Weight
Net: 9.6 kg !21 lb)
Shipping: 11.4 kg (25 ib)
1-6

HP 6038A Specifications

General

Brand	HP
Model	6038A
Category	Inverter
Language	English