Installation Procedures 17
ENWW
Note If you use the HP Jetdirect CD-ROM to install MFP
or All-in-One devices, some features (other than
printing) may not be accessible.
This section provides information on using the HP Jetdirect
CD-ROM software.
Microsoft or Novell NetWare Networks
To install the printer on a supported Windows system using the HP
Jetdirect CD-ROM utility:
1. Insert the HP Jetdirect CD-ROM into your
CD-ROM drive.
2. Wait for the installation utility to start
automatically. If necessary, run
SETUP.EXE from the root directory of the
CD-ROM.
3. When the CD-ROM utility runs, select Install. This runs an
installation wizard.
EIOSG.book Page 17 Thursday, October 9, 2003 1:42 PM
To Next Page
Loading...
