Introduction to Network Printing 29
ENWW
Additional information on network addresses and other parameters
is available using the HP Jetdirect CD-ROM utility (Windows) by
selecting Networking Help.
Setting Up Your Network Printer
Note If you are on a network that uses TCP/IP, check with
your network administrator for a valid IP address
and other required parameters.
The HP Jetdirect CD-ROM contains software to quickly set up your
printer for the network environments summarized below.
Table A-1 Using HP Jetdirect CD-ROM Software
Network System HP Jetdirect CD-ROM Software
Microsoft
networks
(IP or IPX)
Windows 98/Me,
NT 4.0, 2000, XP,
Server 2003
(See Figure A-2) Run the printer
installation wizard on each system
that will print directly to the printer.
If your system is a server on a
client-server network, share the
printer on the server so that it is
available to clients.
EIOSG.book Page 29 Thursday, October 9, 2003 1:42 PM
To Next Page
Loading...
