Switch Options
Rack Mount kits
HP X410 1U Univ 4-post Rack Mnt Kit
J9583A
See Configuration
Note:1, 2
HP X410 1U Integ Univ 4-post Rck Mnt Kit
J9583AZ
See Configuration
Note:1
Rack Shelf
AB469A
See Configuration
Note:3
Cofiguration Rules:
Note 1
Default with switch.
Note 2
If the J9583A is ordered in EMEA fire the following UNBUILDABLE error:
"The J9583A cannot be ordered with option integrated to the Switch in the EMEA region. The Rack Mount kit must be
ordered as BTO using supplier 8OCZ."
Note 3
This has existing rules that say 1 per 20 if 1U and 1 per 10 if its 3U or more. This rule is fine for ProCurve. Note: Both
parts above are required to ship the 62xx Series Switches installed in a rack. Exceptions- The Shelf Kit (AB469A) may
be removed if the Switch is supported underneath by a full depth Server of 3U height or greater mounted on fixed
rails
QuickSpecs
HP 6200 yl Switch Series
Configuration
DA - 12437 North America — Version 17 — December 9, 2013
Page 10
To Next Page
Loading...