HP 6200

HP 6200-24G-mGBIC yl
Switch (J8992A)
I/O ports and slots 24 open mini-GBIC (SFP) slots
Supports a maximum of 4 10-GbE ports, with optional module
Physical characteristics Dimensions 17.44(w) x 15.43(d) x 1.73(h) in
(44.3 x 39.2 x 4.4 cm) (1U height)
Weight 14.11 lb (6.4 kg)
Memory and processor Processor Freescale PowerPC 8540 @ 666 MHz, 4 MB flash,
256 MB DDR SDRAM
Mounting and enclosure Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance 1000 Mb Latency < 3.7 µs (FIFO 64-byte packets)
10 Gbps Latency < 2.1 µs (FIFO 64-byte packets)
Throughput up to 75.7 million pps
Routing/Switching
capacity
101.8 Gb/s
Switch fabric speed 105.6 Gb/s
Routing table size 10000 entries (IPv4)
Environment Operating temperature 32ºF to 131ºF (0ºC to 55ºC); 32°F to 104°F (40°C)
when used with any X2 10-GbE
Operating relative
humidity
15% to 95% @ 104ºF (40ºC), noncondensing
Non-operating/
Storage temperature
–40°F to 158°F (-40°C to 70°C)
Non-operating/
Storage relative humidity
15% to 95% at 149°F (65°C), noncondensing
Altitude up to 15,000 ft (4.6 km)
Acoustic Power: 55.1 dB; DIN 45635T.19 per ISO 7779
Electrical characteristics Description The switch automatically adjusts to any voltage
between 100-127 and 200-240 V with either 50 or
60 Hz.
Maximum heat
dissipation
829 BTU/hr (875 kJ/hr)
AC v oltage 100-127/200-240 VAC
Current 1.8/0.9 A
Power consumption 243 W
Frequency 50/60 Hz
Safety CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity EN EN 55024, CISPR 24
ESD IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated IEC 61000-4-3; 3 V/m
QuickSpecs
HP 6200 yl Switch Series
Technical Specifications
DA - 12437 North America — Version 17 — December 9, 2013 Page 11