Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 620
Redundant/External
Power Supply
(J8696A)
Ports
2 redundant power supply ports
Restrictions: 195 W available per port
2 external power supply ports
Restrictions: 398 W available per port
Physical characteristics
Dimensions
15.4(d) x 17.4(w) x 1.73(h) in. (39.12 x 44.2 x 4.39
cm) (1U height)
Weight
15.2 lb. (6.89 kg)
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Environment
Operating temperature
32°F to 131°F (0°C to 55°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft. (3 km)
Acoustic
LwA per ISO 7779: 54.2 dB
Electrical characteristics
Maximum heat
dissipation
400 BTU/hr (422 kJ/hr), for the actual 620 itself.
PoE-powered device heat dissipation assumed to
be outside the 620.
Voltage
100-127/200-240 VAC
Current
16/8 A
Maximum power rating
1440 W
RPS power
390 W
PoE power
796 W
RPS
12 V
PoE
-50 V
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
Above figures are for maximum RPS and PoE
power being supplied to two switches
simultaneously. 200 - 240 V power cords shipped
with the 620 have a wall plug rated as close to 13
QuickSpecs
HP 6200 yl Switch Series
Accessory Product Details
DA - 12437 North America — Version 17 — December 9, 2013
Page 18
To Next Page
Loading...