Electrical characteristics
Power consumption
typical
1.7 W
Power consumption
maximum
2.4 W
Cabling
Cable type::
62.5/125 µm or 50/125 µm (core/cladding) graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type
A1b or A1a, respectively;
Maximum distance:
2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km
Cable length
2-300m
Fiber type
Multi Mode
Notes
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X131 10G X2 CX4
Transceiver
(J8440C)
HP X131 10G X2 CX4
Transceiver: An X2 format
10-gigabit CX4 transceiver.
Ports
1 CX4 10-GbE port (IEEE 802.3ak Type 10GBASE-CX4); Duplex: full only
Connectivity
Connector type
CX4
Physical characteristics
Dimensions
3.54(d) x 1.42(w) x 0.53(h) in. (8.99 x 3.61 x 1.35
cm)
Weight
0.18 lb. (0.08 kg)
Transceiver form factor
X2
Environment
Operating temperature
32ºF to 131ºF (0ºC to 55ºC)
Operating relative
humidity
15% to 95%, noncondensing
Nonoperating/Storage
temperature
-40ºF to 185ºF (-40ºC to 85ºC)
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics
Power consumption
typical
1.0 W
Power consumption
maximum
3.3 W
Cabling
Maximum distance:
• 15m with CX4 cables
• 300m with optical media converter and multimode fiber cable
Notes
Connector: CX4; Duplex: full
QuickSpecs
HP 6200 yl Switch Series
Accessory Product Details
DA - 12437 North America — Version 17 — December 9, 2013
Page 21
To Next Page
Loading...