HP X131 10G X2 SC LR
Transceiver
(J8437A)
An X2 form-factor
transceiver that supports
the 10-Gigabit LR standard,
providing 10-Gigabit
connectivity up to 10 km
on single-mode fiber.
Ports
1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR); Duplex: full only
Connectivity
Connector type
SC
Wavelength
1310 nm
Physical characteristics
Dimensions
3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09
cm)
Weight
0.35 lb. (0.16 kg)
Transceiver form factor
X2
Environment
Operating temperature
32ºF to 104ºF (0ºC to 40ºC)
Operating relative
humidity
15% to 95%, noncondensing
Nonoperating/Storage
temperature
-40ºF to 185ºF (-40ºC to 85ºC)
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics
Power consumption
typical
2 W
Power consumption
maximum
3 W
Cabling
Cable type::
Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and
ISO/IEC 793-2 Type B1;
Maximum distance:
10 km
Cable length
2m to 10km with 9/125 ìm single-mode cable
Fiber type
Single Mode
Notes
Conditioning patch cord cables are not supported
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 6200 yl Switch Series
Accessory Product Details
DA - 12437 North America — Version 17 — December 9, 2013
Page 23
To Next Page
Loading...