Do you have a question about the HP 6800 and is the answer not in the manual?
Load white paper into the tray and turn the printer on.
Open cover, remove tape from cartridges, insert them, and close the cover.
Select your preferred connection method: 802.11 wireless, Ethernet, or USB.
Verify power and wireless status lights are on for 802.11 setup.
Connect the printer to the network hub, switch, or router using an Ethernet cable.
Connect the printer to your computer and wait for the setup wizard.
Description of printer buttons like Power, Cancel, Resume, and Report Page.
Explanation of lights such as Power, Wireless Status, Signal Strength, and Network lights.
Information on obtaining help, including the Network Guide and Reference Guide.
Access HP support and downloads via the website www.hp.com/support.
Load white paper into the tray and turn the printer on.
Open cover, remove tape from cartridges, insert them, and close the cover.
Select your preferred connection method: 802.11 wireless, Ethernet, or USB.
Verify power and wireless status lights are on for 802.11 setup.
Connect the printer to the network hub, switch, or router using an Ethernet cable.
Connect the printer to your computer and wait for the setup wizard.
Description of printer buttons like Power, Cancel, Resume, and Report Page.
Explanation of lights such as Power, Wireless Status, Signal Strength, and Network lights.
Information on obtaining help, including the Network Guide and Reference Guide.
Access HP support and downloads via the website www.hp.com/support.
Loading...