-1-
CATV Quick Start Guide
HP 8712ET/ES and HP 8714ET/ES
HP Part Number 08714-90021
Printed in USA October 1998
© Copyright 1998 Hewlett-Packard Company
This quick start guide provides basic instructions on how to make measurements that test the quality
of coaxial cables. Refer to the Option 100 Fault Location and Structural Return Loss Measurement
User’s Guide Supplement for more detailed information. Also, please refer to your analyzer’s User’s
Guide for safety, warranty, and assistance information.
NOTE This quick start guide assumes the use of an HP 8712ET or HP 8714ET. If you are using an HP 8712ES or
HP 8714ES, some key presses and displays will be slightly different.
To Make a Fault Location Measurement
1. Choose the measurement parameters or recall an instrument state.
2. Calibrate the analyzer. 3. Connect the equipment.
PRESET BEGIN
To Next Page
