HP 8756A - Page 40

Model 8756A
STEP
REF
@]~
Operating Information
Keypad allows selection of digits, sign,
and decimal point for numerical value
functions (except CURSOR functions) . A
terminator (ENT or dBm/dB) is required,
except for SAVE and RECALL.
Increments or decrements the numerical
value of a function (except CURSOR
functions) to the next allowed value.
The shift function of the STEP DOWN key
provides for setting the REFERENCE LEVEL
step size when using the STEP keys with REF
LEVEL.
After selecting this function,
enter the value desired, and terminate with
the dBm/dB key.
Allows easy entry of CURSOR, SCALE, REF
LEVEL, REF POSN, AVG FACTOR, or DET OFFSET
(under CAL menu) functions.
Figure 3-1. Front Panel Operating Features (7 of 11)
3-9