HP 8756A - Page 71

Model 8756A Operating Information
Table 3-1. Function Select Commands (1 of 3)
Channel Selection
CHAN OFF
l
MEAS J
RATIO
e AIR
e 8/R
e A/8
•
•
•
A
8
R
DISPLAY->MEM
(o I SPLAY)
•
MEAS
•
MEM
•
M-MEM
AUTO
B
• dBIDIV
MKR->REF
B
•
LEVEL
•
POSN
FRONT PANEL KEYS
HP-IB COMMAND
Cl
C2
CO(Zero)
AR
BR
AB
IA
IB
IR
SM
ME
MY
M-
AS
SDd
MR
RLd
RPq
COMMAND DESCRIPTION
Channel 1 selected, all
subsequent commands will
apply to Chan. 1 until
Chan. 2 is selected.
Channel 2 selected, all
subsequent commands will
apply to Chan. 2 until
Chan. 1 is selected.
Turn off channel.
A detector/R detector
Ratio Measurement
B detector/R detector
Ratio Measurement
A detector/R detector
Ratio Measurement
A detector Absolute
Power Measurement
B detector Absolute
Power Measurement
R detector Absolute
Power Measurement
Store Measured Data
in Memory
Display Measured Data
Display Memory Data
Display Measured -
Memory Data
Autoscale Data on CRT
Set Scale per Division,
d set to 20, 10, 5,
2, 1, .5, .2, or .1.
Moves the Cursor (or Active
Marker if no Cursor) and
trace to the reference line.
Reference Level value in dB or
dBm1 value d must be
in the range of
MEAS RATIO or M-MEM: +90 to -90 dB •
MEAS PWR: +20 to -70 dBm.
Reference Position setting on
CRT, where q has values from 0
to 8 corresponding to the major
horizontal graticule lines:
0 = bottom graticule line
4 = center graticule line
8 = top graticule line
3-39