Model
8903BP
Service
CHANGES
2816A and above
for HP8903B
and
2818A and above
for HP8903E
Under “Notes”:
0
Add the following notes;
Note
7.
The
08903-60183
does not have a
W1
jumper wire.
Note
8.
The
08903-60283
and the
08903-60282
are identical boards except
for the position of the
W1
jumper wire. See the partial schematic on page
8B-116.5,
and the Component Locator on page
8B-116.6.
On the
A4
schematic
0
-
A4
-
In the upper left hand corner of the schematic change the board part
number
to
08903-60283.
-
Note:
The
08903-60282
and
08903-60283
are identical boards except for the
positioning of
W1.
See the partial schematic on page
8B-116.5,
and the
Component Locator on page
8B-116.6.
0
-
SS6
-
Use the schematic partial on page
8B-116.5.
On the Component
Locator
0
-
A4
-
Use the component locator on page
8B-116.6
for serial prefixes
2816A
and above
(8903B)
and
2818A
and
above
(89033).
SS6
rev.
14FEB89
8B-116.3
To Next Page
Loading...
