Regulatory Information (Updated March
1999)
To
prevent electrical shock, disconnect instrument from mains (line)
before cleaning. Use a dry cloth
or
one slightly dampened with water
to clean the external case parts.
Do
not attempt to clean internally.
Ventilation Requirements: When installing the product in a cabinet,
the convection into and
out
of
the product must not be restricted.
The ambient temperature (outside the cabinet) must be less than the
maximum operating temperature
of
the product by
4"
C
for every
100
watts dissipated in the cabinet.
If
the total power dissipated in the
cabinet
is
greater than
800
watts, then forced convection must be
used.
Product
Markings
CE
-
the CE mark
is
a
registered trademark
of
the European Community.
A
CE mark
accompanied
by
a year indicated the year the design was proven.
CSA
-
the CSA mark
is
a registered trademark
of
the Canadian Standards Association.
4
Chapter
1
To Next Page
