HP 8920A - Page 277

277
Chapter 5, Advanced Operations
Status Reporting
Table 21 details the Call Processing Status Register Group’s Condition Register
bit assignments.
Table 21 Call Processing Status Register Group, Condition Register Bit Assignments
Bit
Number
Binary
Weighting
Condition Comment
15 32768 Not Used (Always 0) Defined by SCPI Version 1994.0
14 16384 Unused in Test Set
13 8192 Unused in Test Set
12 4096 Unused in Test Set
11 2048 Unused in Test Set
10 1024 Unused in Test Set
9 512 Unused in Test Set
8 256 Unused in Test Set
7 128 Unused in Test Set
6 64 Unused in Test Set
5 32 Call Processing subsystem
in the Connect state
bit state mirrors the condition of the Connect pseudo-
LED on the CRT display (1=ON, 0=OFF)
4 16 Call Processing subsystem
is in the Access state
bit state mirrors the condition of the Access pseudo-
LED on the CRT display (1=ON, 0=OFF)
3 8 Call Processing subsystem
is in the Page state
bit state mirrors the condition of the Page pseudo-
LED on the CRT display (1=ON, 0=OFF)
2 4 Unused in Test Set
1 2 Call Processing subsystem
is in the Register state
bit state mirrors the condition of the Register pseudo-
LED on the CRT display (1=ON, 0=OFF)
0 1 Call Processing subsystem
is in the Active state
bit state mirrors the condition of the Active pseudo-
LED on the CRT display (1=ON, 0=OFF)