HP 8920A - Page 491

491
Chapter 8, Programming The Call Processing Subsystem
Programming The CALL DATA Screen
Reading the CALL DATA Screen Message Fields
This section provides programming information on how to read the individual
fields from the decoded reverse control channel and reverse voice channel
signaling messages available on the
CALL DATA screen.
The syntactical structure for reading one or more fields from an individual
message is as follows:
General Syntax
CALLP:<message name>:<field name><?>[<;><additional field><?>]
Call Data Screen Message and Field Names
Table 49
lists the message names used to access each of the signaling messages
available on the
CALL DATA screen.
Table 49 CALL DATA Screen Signaling Message Names
Message Message Name
RECCW A RECA
RECCW B RECB
RECCW C RECC
RECCW D RECD
RECCW E RECE
RVCOrdCon RCOConfirm