HP 9015 User Manual

6. Insert the USB connector on the module into the USB port (1), and then secure the module with the two
screws that were previously removed (2).
7. Align the tabs on the rear cover with the slots on the display head while placing the cover on the display
head, and then slide the cover down so that it snaps in place.
8. Reconnect all cables to the rear I/O connectors.
9. Reconnect the power cord and press the power button.
16 Chapter 2 Hardware upgrades

HP 9015 Specifications

General

Model	HP 9015
RAM	8GB DDR4 (varies by configuration)
Storage	256GB SSD
Graphics	Intel UHD Graphics
Ports	HDMI
Wireless	Bluetooth 5.0