7. To attach the ergonomic stand, lay the RP9 face down on a at surface covered by a soft clean cloth.
Slide the tabs on the top of the stand mount into the slots on the display head (1), and then rotate the
bottom of the stand mount down onto the display head so that it snaps in place (2).
8. To attach the compact stand, lay the RP9 face down on a at surface covered by a soft clean cloth. Slide
the tabs on the top of the stand mount into the slots on the display head (1), and then rotate the bottom
of the stand mount down onto the display head so that it snaps in place (2).
8 Chapter 2 Hardware upgrades
To Next Page
Loading...
