Embedded Web server sections
Tab or section Options
Information tab
Provides device, status, and
configuration information
●
Device Status: Shows the device status. To change the default settings, click
Change Settings.
●
Configuration Page: Shows the information found on the configuration page.
●
Supplies Status: Shows supplies ordering and recycling information. To order new
supplies, click Shop for Supplies in the Other Links area on the left side of the
window.
●
Event log: Shows a list of all device events and errors.
●
Usage page: Shows a summary of the number of pages the device has scanned,
grouped by size and type.
●
Device Information: Shows the device network name, address, and model
information. To change these entries, click Device Information on the Settings tab.
●
Control Panel: Shows messages from the device control panel, such as Ready or
Sleep mode on.
Settings tab
Provides the ability to configure the
device from your computer
●
Configure Device: Allows you to configure device settings. This page contains the
traditional menus found on devices using a control-panel display.
●
E-mail Server: Used in conjunction with the Alerts page to set up incoming and
outgoing e-mail, as well as to set e-mail alerts.
●
Alerts: Allows you to set up to receive e-mail alerts for various device and supplies
events.
●
AutoSend: Allows you to configure the device to send automated e-mails regarding
device configuration and supplies to specific e-mail addresses.
●
Security: Allows you to set a password that must be entered to gain access to the
Settings and Networking tabs. Enable and disable certain features of the
embedded Web server.
●
Authentication Manager: Allows you to set the device functions that require users
to successfully log in before use.
●
LDAP Authentication: Allows you to configure the digital sender to authenticate
against an LDAP server.
●
Kerberos Authentication: Allows you to configure the digital sender to authenticate
against a Kerberos Domain Controller.
●
Edit Other Links: Allows you to add or customize a link to another Web site. This
link is displayed in the Other Links area on all embedded Web server pages.
●
Device Information: Allows you to name the device and assign an asset number to
it. Enter the name and e-mail address for the primary contact who will receive
information about the device.
●
Language: Allows you to determine the language in which to display the embedded
Web server information.
●
Date & Time: Allows time synchronization with a network time server.
●
Wake Time: Allows you to set or edit a wake time for the device.
54 Chapter 5 Manage and maintain the device ENWW
To Next Page
Loading...
