4. If not prompted to log in, touch From: and then type an e-mail address.
5. Touch To: and then type the same e-mail address.
6. Touch OK and then press Start. The device scans the document and sends it to you as an e-mail
attachment.
7. Repeat this process using the Network Folder option, and verify that the file is sent to the correct
folder.
A successful test shows that the device will scan and send documents to the configured e-mail address
or folder.
If the device does not send the file correctly, verify the device installation and configuration.
Where to look for more information
Feature Description For more
information
Scan to E-mail Scan a document and send it to any e-mail address
EWS user guide
Scan to Folder Scan a document to one or more network folders
Address Book for E-mail and
Fax
Enter names, e-mail addresses, and fax numbers
User PIN Authentication Requires authorization to use device
LDAP Addressing Search an LDAP directory for names and e-mail
addresses
LDAP Authentication
Require user authentication to use specific features
Kerberos Authentication
DSS LANFax Route fax jobs via an existing LANFax
infrastructure
DSS support guide
DSS Send to Folder
Scan a document to one or more network folders.
DSS Workflow Capture information about scanned documents;
route documents to other applications
DSS Windows Negotiated
Authentication
Requires user authentication to use specific
features
DSS LDAP Authentication
8 Install and Setup the Device ENWW
English
To Next Page
Loading...
