Control panel message Description Recommended action
The ADF paper-present sensor might be
defective. Make sure that the sensor flag can
move freely. You can use the scanner tests
(Troubleshooting > Scanner Tests) to test
this sensor. Manually move the flag and
observe whether the status changes on the
control-panel display. If the status does not
change, make sure that the wiring for the
sensor is firmly seated. Clean or replace the
sensor if necessary.
SANITIZING DISK <X>% COMPLETE Do
not power off
The hard disk is being cleaned. Contact the network administrator.
UNABLE TO SEND To temporarily hide this message in order to
fax or send to e-mail, touch IGNORE.
Windows Login Required to use this
feature
The digital send feature that you have
selected requires a Windows login.
Provide your Windows network credentials to
use the digital-sending feature.
Table 6-1 Control-panel messages (continued)
ENWW Control-panel messages 121
To Next Page
Loading...
