Clear jams
If a jam message appears on the control-panel display, follow these instructions to clear jams in the
digital-sender ADF.
1. Press the release button to open the ADF cover.
2. Remove any jammed media from this area. Make sure that you have removed all of the pieces of
torn media.
3. Close the ADF cover.
When clearing jams, be very careful not to tear jammed media. If a small piece of media remains in the
digital sender, it could cause additional jams. If jams are a recurring problem, see
Solve repeated
jams on page 128.
ENWW Clear jams 127
To Next Page
Loading...
