Service menu
The following items are available on the control-panel Service menu. The PIN code for access to the
Service menu is 03925007.
●
Clear Event Log
●
Document Feeder Kit Count
●
Document Feeder Kit Interval
●
ADF Count
●
Flatbed Count
●
ADF Simplex Count
●
ADF Duplex Count
●
Send Scan Count
●
Scanner Settings
NOTE: The Scanner Settings are used for factory adjustments and should not be used by
service personnel. Use the scanner calibration routine to adjust the scanner settings if
necessary.
●
Serial Number
●
Service ID
●
Cold Reset Paper
142 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...
