EasyManua.ls Logo

HP 9250C Digital Sender - Page 236

HP 9250C Digital Sender
250 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Physical specifications
Table B-1 Physical specifications
Height Depth Width Weight
340.26 mm
(13.40 inches)
571.82 mm
(22.51 inches)
452.62 mm
(17.82 inches)
23.09 kg
(50.7 lbs)
Electrical specifications
Table B-2 Electrical specifications
Power requirements 100-240V (±10%)
50/60 Hz (±2 Hz)
Minimum recommended circuit capacity 1.0 Amp
WARNING! Power requirements are based on the country/region where the device is sold. Do
not convert operating voltages. This will damage the digital sender and void the product warranty.
Power consumption specifications
Table B-3 Power consumption (average, in watts)
1
Scanning (55 ppm)
2
Ready Sleep Off
98 W 35 W 15.7 W 0 W
1
Values subject to change. See www.hp.com/support/9250c for current information.
2
Power reported is highest value measured for color and monochrome scanning using all standard voltages.
3
Default time from Ready mode to Sleep = 60 minutes.
4
Heat dissipation in Ready mode = 119 BTU/Hour.
220 Appendix B Specifications ENWW

Other manuals for HP 9250C Digital Sender

Related product manuals