HP 9250C Digital Sender - Site Preparation Guidelines; System Requirements

Prepare the site
Select a well-ventilated, dust-free area to install the device. Place the device on a sturdy surface.
720.85 mm
720.85 mm
(28.38 inches)
(28.38 inches)
720.85 mm
720.85 mm
(28.38 inches)
(28.38 inches)
452.62 mm
452.62 mm
(17.82 inches)
(17.82 inches)
724.20 mm
724.20 mm
(28.51 inches)
(28.51 inches)
System requirements
To install the HP Digital Sender 9250c, the computer system must have the following features:
●
Fast Ethernet 100Base-TX or Ethernet 10Base-T
●
Access to an SMTP e-mail gateway
NOTE: HP highly recommends establishing SMTP gateway on your own local area network.
However, the device can be configured for e-mail functionality even if mail services are provided
by an outside Internet service provider (ISP) over a digital subscription line (DSL).
14 Chapter 2 Installation and configuration ENWW